ElastiPoxy Joint & Crack Filler Kit (2-qts.) - Floor-To-Wall Joint Sealant, Cracks in Concrete Blocks, Expansion Joints, Spalled Concrete

ElastiPoxy Joint & Crack Filler Kit (2-qts.) - Floor-To-Wall Joint Sealant, Cracks in Concrete Blocks, Expansion Joints, Spalled Concrete

Images for ElastiPoxy Joint & Crack Filler Kit (2-qts.) - Floor-To-Wall Joint Sealant, Cracks in Concrete Blocks, Expansion Joints, Spalled Concrete


ElastiPoxy Joint & Crack Filler Kit (2-qts.) - Floor-To-Wall Joint Sealant, Cracks in Concrete Blocks, Expansion Joints, Spalled Concrete Short Description


ElastiPoxy Joint & Crack Filler Kit is a unique, state-of-the-art joint sealant and crack filler for concrete, concrete blocks, and masonry. A two-component FLEXIBLE epoxy. No polymer additives, 100% solids, ZERO VOCs. Low viscosity, self-leveling epoxy for filling joints, cracks, and spalls in slabs. Impact-resistant. Virtually indestructible under high water pressure or heavy traffic. Good chemical and water resistance. When mixed with sand, provides a strong, rigid filler for filling cracks or defects in masonry walls. Suitable for both contractors and homeowners. OLD WAYS AT FIXING CRACKS - Hydraulic cement is waterproof but does not bond well to concrete. That's why it needs an inverted V-groove. It is also very rigid and does not move with the concrete. Polyurethane caulk is both waterproof and flexible. It bonds well to the surface of dry concrete but wicking water and efflorescence gradually weaken the bond. It has no strength and easily separates due to water pressure. KIT CONTENTS: 1 can of Base Resin (A), 1 can of Epoxy Hardener (B), 2 measuring cups, 2 mixer attachments. You will need a plastic container for mixing and a low-speed drill for the mixers. If needed, DRY construction or play sand. A small plastic watering can or cup with a spout for pouring pure epoxy into joints and cracks in floors or a small trowel for applying the epoxy-sand mix. APPEARANCE: Gray. You can mix in color pigment or use colored sand to match the surface color. The filler is partially paintable. When using pure epoxy, it is best to roughen up the surface first with a grinder. COVERAGE: Based on a routed out crack 1/4" wide by 1/2" deep and using pure epoxy, the smaller kit (2-qts.) will fill approximately 75 linear feet. The larger kit (2-gals) provides four times more volume, 300 linear ft. Using the smaller 2-qts. kit and 4:1 sand to epoxy ratio, you will need approximately 20 lbs. of dry sand and the mixture will fill about 375 ft. of cracks ¼" wide and ½" deep.

ElastiPoxy Joint & Crack Filler Kit (2-qts.) - Floor-To-Wall Joint Sealant, Cracks in Concrete Blocks, Expansion Joints, Spalled Concrete Key Features


  • Adequate elongation to allow for the natural movement of concrete or masonry
  • Adhesion to damp surfaces, making it ideal for basements, slabs on grade, and driveways
  • Environment-friendly, zero VOCs
  • For foundation slabs and basement floors to allow for the natural movement of concrete slabs
  • Floor-to-wall joint sealant
  • Seals against water & radon gas
  • Garage floor to driveway joint
  • For factory floors and driveways to protect edges against heavy wheel loadings
  • Filler for pit marks in slabs
  • Cracks in concrete blocks or brick walls
  • Spalls, pits, holes, and defects in concrete driveways, patios, and pool decks
  • Large cracks in concrete or masonry floors and walls
  • Lightweight and split face blocks, or other blocks with little or no cement
  • Very porous or crumbling blocks and concrete
  • Leaking form ties in poured concrete walls




List Price: $ 144.00


Check for best price today




share this article to: Facebook Twitter Google+ Linkedin Technorati Digg
Posted by Janice Foy, Published at 9:14 AM and have